Control file listing for: Braillo 200/400 with 270 style ROMs

This is the Embosser Control File. Changing this file affects the embosser is supported. Support is also related to the generic embosser entry in the table

• # *** Embosser definition unchanged since 05/12/2011
• # escape sequence (using Braillo Driver. name contains 270)
• # Note: no escape command for interpoint / single sided
• # Note. only supports whole inches 4-14 length plus 9.5. 10.5. 11.5. 12.5. and 13.5
• # Note. only supports widths 27-42 (no 1E or 1F sequence used if outside of the range)
• # esc 6. esc A. esc Ascii 30. esc Ascii 31. esc E
• # Based on prom version 01-16
• CanDoInterpoint
• NoLeftMargin
• NoRightMargin
• MaximumCells = 42
• UsingEscapeCodes
• Driver = "Emb_BrailloEmbosserDriver"
• Submodel = 2
• HelpPage = "Braillo_200_400_with_270_style_ROMs.htm"
• Form "10_n" = 85 x 100 ; SinglePage ; 34 x 25 ; 32 x 23
• Form "11_n" = 85 x 110 ; SinglePage ; 34 x 27 ; 32 x 25
• Form "11_w" = 115 x 110 ; SinglePage ; 42 x 27 ; 40 x 25
• Form "12_n" = 85 x 120 ; SinglePage ; 34 x 30 ; 32 x 28
• Form "12_w" = 115 x 120 ; SinglePage ; 42 x 30 ; 40 x 28
• Form "13_n" = 85 x 130 ; SinglePage ; 34 x 32 ; 32 x 30
• Form "13_w" = 115 x 130 ; SinglePage ; 42 x 32 ; 40 x 30