This is the Embosser Control File. Changing this file affects the embosser is supported. Support is also related to the generic embosser entry in the table
# *** Embosser definition unchanged since 05/12/2011
# escape sequence (using Braillo Driver. name contains 270)
# Note: no escape command for interpoint / single sided
# Note. only supports whole inches 4-14 length plus 9.5. 10.5. 11.5. 12.5. and 13.5
# Note. only supports widths 27-42 (no 1E or 1F sequence used if outside of the range)