Control file listing for: Braillo 400S

This is the Embosser Control File. Changing this file affects the embosser is supported. Support is also related to the generic embosser entry in the table

• # *** Embosser definition unchanged since 05/12/2011
• # same escape sequence as Braillo 200
• # A4 paper supported in the embosser only if the ROM chip is labeled A4
• # These escape sequences are based on the Braillo 000.17 version ROM
• CanDoInterpoint
• NoLeftMargin
• NoRightMargin
• MaximumCells = 42
• UsingEscapeCodes
• Driver = "Emb_BrailloEmbosserDriver"
• Submodel = 5
• HelpPage = "Braillo_400S.htm"
• Form "10_n" = 85 x 100 ; SinglePage ; 34 x 25 ; 32 x 23
• Form "11_n" = 85 x 110 ; SinglePage ; 34 x 27 ; 32 x 25
• Form "11_w" = 115 x 110 ; SinglePage ; 42 x 27 ; 40 x 25
• Form "A4" = 83 x 115 ; SinglePage ; 34 x 29 ; 32 x 28
• Form "12_n" = 85 x 120 ; SinglePage ; 34 x 30 ; 32 x 28
• Form "12_w" = 115 x 120 ; SinglePage ; 42 x 30 ; 40 x 28
• Form "13_n" = 85 x 130 ; SinglePage ; 34 x 32 ; 32 x 30
• Form "13_w" = 115 x 130 ; SinglePage ; 42 x 32 ; 40 x 30