Control file listing for: Braillo 650 SW

This is the Embosser Control File. Changing this file affects the embosser is supported. Support is also related to the generic embosser entry in the table

• # *** Embosser definition unchanged since 07/12/2013
• # escape sequence (using Braillo Driver. name contains 650)
• # esc A. esc H. esc B. esc P
• Driver = "Emb_BrailloEmbosserDriver"
• Submodel = 11
• CanDoInterpoint
• NoParallel
• NoSerial
• NoLeftMargin
• NoRightMargin
• MaximumCells = 44
• UsingEscapeCodes
• HelpPage = "Braillo_650_SW.htm"
• Form "10_n" = 85 x 100 ; SinglePage ; 34 x 22 ; 32 x 22
• Form "11_n" = 85 x 110 ; SinglePage ; 34 x 25 ; 32 x 25
• Form "11_w" = 115 x 110 ; SinglePage ; 44 x 25 ; 40 x 25
• Form "11_d" = 230 x 110 ; DoublePage ; 44 x 28 ; 40 x 25
• Form "12_n" = 85 x 120 ; SinglePage ; 34 x 28 ; 32 x 28
• Form "12_w" = 115 x 120 ; SinglePage ; 44 x 28 ; 40 x 28
• Form "12_d" = 230 x 120 ; DoublePage ; 44 x 28 ; 40 x 28
• Form "13_n" = 85 x 130 ; SinglePage ; 34 x 30 ; 32 x 28
• Form "13_w" = 115 x 130 ; SinglePage ; 44 x 30 ; 40 x 28
• Form "13_d" = 230 x 130 ; DoublePage ; 44 x 30 ; 40 x 28
• Form "13.5_d" = 230 x 135 ; DoublePage ; 44 x 31 ; 40 x 31