Control file listing for: Enabling PED-30

This is the Embosser Control File. Changing this file affects the embosser is supported. Support is also related to the generic embosser entry in the table

• # *** Embosser definition unchanged since 12/02/2008
• # no escape sequences
• CanDoInterpoint
• NoMakeupSides
• MaximumCells = 40
• MaximumLines = 28
• EndofPage = 0
• NoLeftMargin
• NoRightMargin
• NoTopMargin
• NoParallel
• NoMakeupSides
• PromptNewPage
• PlateLoadByte = 13
• HelpPage = "Enabling_PED-30.htm"
• Form "11_w" = 115 x 110 ; SinglePage ; 40 x 28 ; 40 x 25
• Form "12_w" = 115 x 120 ; SinglePage ; 40 x 30 ; 40 x 27
• # N.B. Number 1 immediately following SinglePage in line below means
• # that the form itself is offset by one cell from the left edge of
• # the carriage.
• Form "nbp" = 115 x 110 ; SinglePage 1 ; 39 x 28 ; 40 x 25