Control file listing for: Freedom Scientific VersaPoint Duo

This is the Embosser Control File. Changing this file affects the embosser is supported. Support is also related to the generic embosser entry in the table

• # *** Embosser definition unchanged since 06/19/2015
• # using escape sequence. using Enabling Driver if you say embosser allows escape sequences
• # esc X. esc K. esc W. esc T. esc L. esc R. esc Q. esc H. esc &. esc i
• CanDoInterpoint
• ETMediumResGraphics
• # N.B. Firmware older than Revision 6.25V (June 15. 1999) will not support.
• # High Resolution Graphics.
• ETHighResGraphics
• SeparateGraphics=2
• ETmulti
• PageWrap
• ETCAllowEscapeCodes
• Driver = "Emb_EnablingEmbosserDriver"
• MaximumCells = 40
• MaximumLines = 27
• Encoding = "display.cpt". "North American English"
• Encoding = "display.cpt". "British"
• Encoding = "display.cpt". "French"
• Encoding = "display.cpt". "German"
• Encoding = "display.cpt". "Spanish"
• HelpPage = "Freedom_Scientific_VersaPoint_Duo.htm"
• Form "10_n" = 85 x 100 ; SinglePage ; 34 x 24 ; 32 x 23
• Form "11_n" = 85 x 110 ; SinglePage ; 34 x 27 ; 32 x 25
• Form "11_w" = 115 x 110 ; SinglePage ; 40 x 27 ; 40 x 25
• Form "12_n" = 85 x 120 ; SinglePage ; 34 x 30 ; 32 x 28
• Form "12_w" = 115 x 120 ; SinglePage ; 40 x 30 ; 40 x 28
• Form "13_n" = 85 x 130 ; SinglePage ; 34 x 32 ; 32 x 30
• Form "13_w" = 115 x 130 ; SinglePage ; 40 x 32 ; 40 x 30