Control file listing for: Index Everest-D

This is the Embosser Control File. Changing this file affects the embosser is supported. Support is also related to the generic embosser entry in the table

# *** Embosser definition unchanged since 06/30/2016
# using escape sequence. using Index Driver with version 5 software
# esc D with parameters specified in InitSequence setting
CanDoInterpoint
VPGraphics
Index20Graphics
Index16Graphics
MaximumCells = 47
MaximumLines = 27
EndofPage = 1
IndexMulti
YesUSB
NoParallel
ControlZ
IndexPagemm
Driver = "Emb_IndexEmbosserDriver"
WindowsDriverName = "Everest"
StartLeftMargin = 0
# InitSequence as recommended for V4 firmware 1.3.4
InitSequence="BT0.TD0.PN0.DP.LS50.TM.BI.CH.LP.MC"
HelpPage = "Index_Everest-D.htm"
Form "A5" = 58 x 83 ; SinglePage ; 23 x 19 ; 21 x 18
Form "A5_landscape" = 83 x 58 ; SinglePage ; 35 x 15 ; 30 x 14
Form "A3" = 117 x 165 ; SinglePage ; 42 x 41 ; 40 x 40
Form "A4" = 83 x 117 ; SinglePage ; 35 x 29 ; 30 x 27
# PJS: Ask Index about A4_ex. Do they have a name for this one?
Form "A4_ex" = 98 x 117 ; SinglePage ; 41 x 29 ; 41 x 27
Form "A3_landscape" = 165 x 117 ; SinglePage ; 68 x 29 ; 66 x 27
Form "A4_landscape" = 117 x 83 ; SinglePage ; 42 x 20 ; 40 x 18
Form "A3_folio" = 165 x 117; DoublePage ; 33 x 29 ; 31 x 27
Form "A3_ex_folio" = 197 x 117; DoublePage ; 41 x 29 ; 40 x 27
Form "A4_folio" = 117 x 83; DoublePage ; 22 x 20 ; 20 x 20
Form "10_n" = 85 x 100 ; SinglePage ; 36 x 24 ; 32 x 23
Form "11_n" = 85 x 110 ; SinglePage ; 36 x 27 ; 32 x 25
Form "11_w" = 115 x 110 ; SinglePage ; 47 x 27 ; 40 x 25
Form "12_n" = 85 x 120 ; SinglePage ; 36 x 30 ; 32 x 28
Form "12_w" = 115 x 120 ; SinglePage ; 47 x 30 ; 40 x 28
Form "14_n" = 85 x 140 ; SinglePage ; 36 x 35 ; 32 x 34
Form "11_nd" = 170 x 110; DoublePage ; 33 x 28 ; 32 x 25
Form "RusBook" = 96 x 117 ; SinglePage ; 40 x 29 ; 36 x 27
Form "RusNote" = 150 x 99; SinglePage ; 41 x 37 ; 38 x 37
Form "RusNote_folio" = 150 x 99; DoublePage ; 31 x 25 ; 30 x 23